1966 - 1972 ZAZ 966 Sedan 0.9 (27 Hp) - specs, fuel economy, dimensions, MPG

Combustion engine0.9 (27 Hp) 1966 - 1972
SELECT ENGINE:

1966, 1967, 1968, 1969, 1970, 1971, 1972
ZAZ 966 Sedan 0.9 (27 Hp) - specs, MPG, dimensions

General information
BrandZAZ
Model 966
Model year of the generation and generation1966, 966
Engine / Trim 0.9 (27 Hp)
Production years1966 - 1972
Powertrain Architecture Internal Combustion engine
Body type5-Seat 2-Door Sedan
Performance specs
Fuel economy at Low speed (WLTP) N/A
Fuel economy at Medium speed (WLTP) N/A
Fuel economy at high speed (WLTP) N/A
Fuel economy at very high speed (WLTP) N/A
Fuel economy - combined (WLTP) N/A
CO2 emissions (WLTP)N/A
Fuel economy - urban N/A
Fuel economy - extra urban N/A
Fuel economy - combined N/A
CO2 emissionsN/A
Fuel Type Petrol (Gasoline)
Acceleration 0 - 60 mph N/A
Acceleration 0 - 62 mphN/A
Acceleration 0 - 100 km/hN/A
Acceleration 0 - 200 km/h N/A
Acceleration 0 - 300 km/h N/A
Maximum speed N/A
100 km/h - 0 N/A
200 km/h - 0 N/A
Emission standard N/A
Weight-to-power ratio N/A
Weight-to-torque ratio N/A
Internal combustion engine specs
Power 27 hp @ 4000 rpm.
Power per litre 30.4 hp/l
Torque 38.4 lb-ft or 52 Nm @ 2600 rpm.
Max engine rpm (redline) N/A
Engine layout Rear, Longitudinal
Engine Model/Code ME MZ-965
Engine displacement 54.13 cu in
887 cm3
0.9 l
Engine configuration4 cylinders, V-engine
Bore x Stroke 2.83 x 2.15 in
72 x 54.5 mm
Compression ratio 6.5:1
Number of valves per cylinder 2
Fuel injection system Carburettor
Engine aspiration Naturally aspirated engine
Valvetrain N/A
Engine oil capacity N/A
Engine oil specification N/A
Coolant capacity N/A
Engine systemsN/A
Space, Volume and weights
Curb Weight N/A
Permissible maximum weight N/A
Maximum loadN/A
AdBlue tank N/A
Max. roof load N/A
Permissible trailer load with brakes on 8% slope N/A
Permissible trailer load with brakes on 12% slope N/A
Permissible trailer load without brakes N/A
Permissible towbar download N/A
Dimensions
Length 146.85 in
3730 mm
Width 61.81 in
1570 mm
Width with mirrors folded N/A
Width including mirrors N/A
Height 55.12 in
1400 mm
Wheelbase 85.04 in
2160 mm
Front track 48.03 in
1220 mm
Rear track 47.24 in
1200 mm
Front overhang N/A
Rear overhang N/A
Ride height (ground clearance) N/A
Drag coefficient (Cd) N/A
Minimum turning circle (turning diameter) 38.7 ft
11.8 m
Approach angle N/A
Departure angle N/A
Ramp-over angle N/A
Climb angle N/A
Wading depth N/A
Drivetrain, brakes and suspension specs
Drivetrain Architecture The Internal combustion engine (ICE) drives the rear wheels of the vehicle.
Drive wheel Rear wheel drive
Number of gears and type of the gearbox4 gears, manual transmission
Front suspension Independent coil spring
Rear suspension Independent coil spring
Front brakesDrum
Rear brakesDrum
Assisting systemsN/A
Steering type Cone worm with recirculation balls
Tires size N/A
Wheel rims sizeN/A

What are the production years of 1966 ZAZ 966 0.9 (27 Hp)?
The 1966 ZAZ 966 0.9 (27 Hp) was produced from 1966 until 1972. The exact production years of 1966 ZAZ 966 0.9 (27 Hp) are 1966, 1967, 1968, 1969, 1970, 1971, 1972.

What is the powertrain of the 1966 ZAZ 966 0.9 (27 Hp)?
The powertrain unit of 1966 ZAZ 966 0.9 (27 Hp) is Internal Combustion engine.

What is the bodystyle of the 1966 ZAZ 966 0.9 (27 Hp)?
The bodystyle of the 1966 ZAZ 966 0.9 (27 Hp) is 5-seat 2-door Sedan.

What is the type of fuel which 1966 ZAZ 966 0.9 (27 Hp) uses?
The 1966 ZAZ 966 0.9 (27 Hp) uses Petrol (Gasoline).

What is the maximum power of the combustion engine of 1966 ZAZ 966 0.9 (27 Hp)?
The maximum power of the combustion engine of the 1966 ZAZ 966 0.9 (27 Hp) is 27 hp. It is achieved at 4000 prm. The specific output is 30.4 hp per l.

What is the maximum torque of the combustion engine of 1966 ZAZ 966 Sedan 0.9 (27 Hp)?
The maximum torque of the combustion engine of the 1966 ZAZ 966 Sedan 0.9 (27 Hp) is 52 Nm or 38.4 lb-ft. It is achieved at 2600 prm. The specific torque is 58.6 Nm per l or 43.2 lb-ft per l.

What are the layout and the code of the combustion engine of 1966 ZAZ 966 0.9 (27 Hp)?
The layout of the combustion engine of 1966 ZAZ 966 0.9 (27 Hp) is Rear, Longitudinal. The engine code of the ICE is ME MZ-965.

What are the engine displacement, cylinder layout and bore x stroke of the 1966 ZAZ 966 0.9 (27 Hp)?
The engine displacement of the 1966 ZAZ 966 0.9 (27 Hp) is 887 cm3 or 54.13 cu in or 0.9 l.The ICE has 4 cylinders. The cylinder layout is V-engine. Bore x stroke are 72 x 54.5 mm or 2.83 x 2.15. Bore to stroke ratio is 1.32:1. The engine is over-square.

What is the compression ratio of the combustion engine of 1966 ZAZ 966 0.9 (27 Hp)? How many valves does the engine have?
The combustion engine of the 1966 ZAZ 966 0.9 (27 Hp) has a compression ration of 6.5:1. It has 2 valves per cylinder or 8 valves at all.

What is the fuel injection system, the engine aspiration and the valvetrain of 1966 ZAZ 966 0.9 (27 Hp)?
The 1966 ZAZ 966 0.9 (27 Hp) has a internal combustion engine, or a thermal (also called heat) engine. The fuel injection system of this engine is Carburettor. The engine aspiration is Naturally aspirated engine.